The N3304A is a 300W (0-60A, 0-60V) electronic load module for use in either the N3300A or N3301A electronic load mainframe.
Configurations:
- (JO1) increases the input voltage from 60 V to 80 V, 0-60A, 300 W, for N330X mainframes, 1 slot
N3304A DC Electronic Load:
- Constant current mode Low Range/High Range: 6 A/60 A
- Constant voltage mode Low Range/High Range: 8 V/80V
- Readback resolution: 0.1/1 mA, 0.1/1 mV
- Ripple and noise (20 Hz–10 MHz)
- Programmable slew rate
N3300 Series Features:
- Choice of half-rack width or full-rack width mainframe
- Constant current, constant voltage, and constant resistance modes
- Built-in transient generator
- 16-bit voltage and current measurements captured simultaneously
- Stable operation down to 0 V
- Modular design for system flexibility
- Fast command processing and settling times
- Available interfaces: analog, RS232, and GPIB
The N3300 Series supports up to six channels, each with a unique maximum voltage and current. They allow the design of a flexible automated test equipment (ATE) system to verify many types of power supplies, DC-to-DC converters, and batteries. Add additional modules to test multiple power sources simultaneously. Each module includes a 16-bit voltage, current, and power measurement system.
The N3304A is a 300W (0-60A, 0-60V) electronic load module for use in either the N3300A or N3301A electronic load mainframe.
Configurations:
- (JO1) increases the input voltage from 60 V to 80 V, 0-60A, 300 W, for N330X mainframes, 1 slot
N3304A DC Electronic Load:
- Constant current mode Low Range/High Range: 6 A/60 A
- Constant voltage mode Low Range/High Range: 8 V/80V
- Readback resolution: 0.1/1 mA, 0.1/1 mV
- Ripple and noise (20 Hz–10 MHz)
- Programmable slew rate
N3300 Series Features:
- Choice of half-rack width or full-rack width mainframe
- Constant current, constant voltage, and constant resistance modes
- Built-in transient generator
- 16-bit voltage and current measurements captured simultaneously
- Stable operation down to 0 V
- Modular design for system flexibility
- Fast command processing and settling times
- Available interfaces: analog, RS232, and GPIB
The N3300 Series supports up to six channels, each with a unique maximum voltage and current. They allow the design of a flexible automated test equipment (ATE) system to verify many types of power supplies, DC-to-DC converters, and batteries. Add additional modules to test multiple power sources simultaneously. Each module includes a 16-bit voltage, current, and power measurement system.
